Results 1 to 2 of 2

Thread: Railroad Tracks.....something to ponder.....

  1. #1
    Delta Dufus Big Muddy's Avatar
    Join Date
    Aug 2012
    Location
    Flatlands
    Posts
    9,602

    Railroad Tracks.....something to ponder.....

    .
    """The U.S. Standard railroad gauge (distance between the rails) is 4 feet, 8.5
    inches.

    That's an exceedingly odd number. Why was that gauge used? Because that's
    the way they built them in England, and English expatriates designed the
    U.S. Railroads.

    Why did the English build them like that?

    Because the first rail lines were built by the same people who built the
    pre-railroad tramways, and that's the gauge they used.

    Why did 'they' use that gauge then?

    Because the people who built the tramways used the same jigs and tools that
    they had used for building wagons, which used that wheel spacing.

    Why did the wagons have that particular odd wheel spacing?

    Well, if they tried to use any other spacing, the wagon wheels would break
    on some of the old, long distance roads in England, because that's the
    spacing of the wheel ruts.

    So, who built those old rutted roads?

    Imperial Rome built the first long distance roads in Europe (including
    England ) for their legions. Those roads have been used ever since.

    And the ruts in the roads?

    Roman war chariots formed the initial ruts, which everyone else had to match
    for fear of destroying their wagon wheels.

    Since the chariots were made for Imperial Rome, they were all alike in the
    matter of wheel spacing. Therefore, the United States standard railroad
    gauge of 4 feet, 8.5 inches is derived from the original specifications for
    an Imperial Roman war chariot. In other words, bureaucracies live forever.

    So the next time you are handed a specification, procedure, or process, and
    wonder, 'What horse's ass came up with this?', you may be exactly right.

    Imperial Roman army chariots were made just wide enough to accommodate the
    rear ends of two war horses.

    Now, the twist to the story:

    When you see a Space Shuttle sitting on its launch pad, you will notice that
    there are two big booster rockets attached to the sides of the main fuel
    tank. These are solid rocket boosters, or SRBs. The SRBs are made by Thiokol
    at their factory in Utah.

    The engineers who designed the SRBs would have preferred to make them a bit
    larger, but the SRBs had to be shipped by train from the factory to the
    launch site. The railroad line from the factory happens to run through a
    tunnel in the mountains, and the SRBs had to fit through that tunnel. The
    tunnel is slightly wider than the railroad track, and the railroad track, as
    you now know, is about as wide as two horses' asses.

    So, a major Space Shuttle design feature of what is arguably the world's
    most advanced transportation system was determined over two thousand years
    ago by the width of a horse's ass.

    And you thought being a horse's ass wasn't important!

    Now you know, horses' asses control almost everything...explains a whole lot
    of stuff, doesn't it? """
    Southern Gentleman

  2. #2
    Senior Member (too much time on their hands) Bwana's Avatar
    Join Date
    Aug 2012
    Location
    North Dakota
    Posts
    3,511

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body.
But rather, to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming...WOW, What a Ride!"

Our Friend, Tony "Gator" Hunter 1953-2007